Technics SA-EX320 Receiver "cause list" Questions

list 8 ohm. Does this mean 8 ohm minimum, or would this output be able to support a 4 ohm load? If the speaker terminal lists 8 ohm min on the back of the receiver, use the recommended rating, because

list. If you are really sure you need one, just pull out the old fuse and read what it says. And find out why the old fuse blew. There is NO SUCH THING as a "general fuse". You will cause a nasty fire

...reciever. An Insignia receiver is not listed in the Moxi remote. Thanks. Type in all the codes, cause sometimes they will operate multiple

no display lights This can be caused by a lot of different things. a bad voltage regulator, a bad bulb, bad lcd, and the list goes on. Could you please tell more about the problem, like what model ...

...flashes OVERLOAD and shutdown. Overload is displayed when the amp draw is excessive, and can be caused by different faults. when Overload is detected, the protection circuit will shut down the ...

...starts up ! then says protector push power Protect mode will kicking whenever a fault is detected. Causes that can start protect mode are: Electrostatic harges on internal circuits. Leave the unit ...

...but even if you see something obvious and replace it you migh not know what the original cause for failure was, so you may just be wasting time and sacrificing new parts. ...

...list of some of those possibilities, every single one of these things can cause the exact problem you are having but finding out which one requires some good electronic troubleshooting skills: 1. A ...

...list the number of blinks with problem. However its not a simple fix. plus make sure HDMI cable is unplugged when reseting receiver if this cable has a short it may cause it to. Sorry to hear the bad ...