Technics SA-DA10 Receiver "reset unit" Questions

...all the parameters of this unit to the initial factory settings. Choices: CANCEL, RESET ?Select ?ANCEL?not to reset any parameters of this unit. ?Select ?ESET?to reset the parameters of this

...exception of System Memory and AUTO SETUP settings. Choices: CANCEL, RESET * Select CANCEL if you do not want to reset the parameters of this unit. * Select RESET to reset the parameters of this

...reset the unit to factory settings, and try. To reset the unit to factory default settings, so the following [1] Press STANDBY/ON on the front panel to set this unit to standby mode. [2] Press and ...

reset. If the unit starts up normally start connecting the speakers one at a time (shutting the power down before connecting each one), until one of the speakers causes the receiver to shut down. This

...inside because when you accidentally short the speaker connection it has already a defective parts. that's why yamaha service center did not reset the unit because it has a problem with the

reset the unit will be returned to the factory presets, and all settings for these items must be reentered. If the system is still operating incorrectly, there may have been an electronic discharge or

...until you see S3. This is the factory reset. Press the CD button repeatedly until it says Preset Reserved. Press the power key and the unit will be reset to original factory specs. Good luck to

...Reset In the rare case where the unit's operation or the displays seem abnormal, the cause may involve the erratic operation of the system's memory or microprocessor. To correct this problem, first ...

...the unit off, then press and hold the on button for five seconds. The unit will reset automatically. Not sure about this but it's worth a try. this will also reset any custom settings you have

...reset the unit? Resetting the unit has fixed every problem I have ever had......turn off unit.....hold down A+B at the same time then turn the unit back on...hold buttons for roughly 3 seconds....Let ...