Konica Minolta DiMAGE G530 Digital Camera "off lens" Questions

...lens assembly will come off. This allows access to the zoom assembly which is probably the part that is rattling as it slides the back lens along its shaft. You may want to let a professional do this ...

...off. Sometimes the lens won't even move. Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and ...

...off the lens does not retract. Lens motor seems to be working but not at correct time. Any helpful advice would be much appreciated. I have the same problem. The lenses does not retract when turned ...

off and on again to take another shot.???WHY??? Hello The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have

off your lens with the cloth. Do not rub the element! You just want to wipe. It may take a few wipes to get it clean. 4) If after a few wipes, and you still have spots: put a few drops of lens cleaner

...lens looked straight. It had opened in a pocket and gotten bumped. I had even taken the case off but that did not offer any insight into fixing the problem. (They certainly cram a lot into the case). ...

lens off (twist the base ring about 45 degrees) then try starting up the camera. It should still fault but give a different error code. That would tell you if the problem is the motor or the lens tube

lens off my konica minolta dimage a200 i dunno how to take off the standard lens as i what to buy a bigger lens can it come off for to put bigger lens on it ? Sorry, the lens is fixed onto this camera

lens on the body with the soft tissue on the palm of your hand. Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the

lens on the body with the soft tissue on the palm of your hand. Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the