NEC MultiSync MT830 Multimedia Projector "reset select" Questions

...module is replaced. Lamp Reset: (i) Press "Menu"  (ii) Select "Options"  (iii) Select "Lamp settings"  (iv) Select "Lamp Reset  (v) Select

...lamp reset diagonal box will appear 6 using the up arrow button select reset. Also try to reset the filter time using the same procedure lamp reset is recommended only after the lamp replacement. ...

...select "Yes" to reset lamp replacement counte.** Do not reset the lamp replacement counter without implementing lamp replacement.  Be sure to reset the lamp replacement counter only after ...

...HI,   Do the following for lamp rest after powering ON the projector. Press "MENU"--> Select "OPTIONS" --> Select "LAMP SETTINGS"  --> Select "LAMP RESET"--> Select ...

...the lamp hour of your projector. For that do the following. 1. power on the projector. 2. Press the menu button 3. select lamp settings 4. Select lamp reset 5. Select yes to reset the lamp hour. ...

select reset it tak... When i go through the menu and select reset it takes you through to a second prompt which reads reset twice and cancel once however when you try toselect reset by arrowing up it

...and do in reverse. reset lamp timer press menu, go to setting, and press the select button. select lamp age click yes to 'lamp replace monitor reset' OK is displayed, select yes then select no ...

..."Lamp replace counter reset?" is displayed. Move the pointer to [Yes] and then SELECT button. 3) Another confirmation dialog box appears and select [Yes] to reset Lamp Replace Counter. Good

...HD70 How do you reset the lamp operating time? hi, Do the following for reset the lamp hour. 1. Press the menu button 2. Select Options. 3. Select lamp settings 4. Select lamp reset. 5 Select Yes ...

...select that, scroll over to the "RESET" under the lamp hours... this should reset it. Here is a link to the owners manual for your unit. ...