Question about NEC Office Equipment & Supplies
Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...
...red status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started ...
Question about NEC Office Equipment & Supplies
status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 cycle: the
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
...red with yellow/orange status light indicates that the temperature is too high, so by the sounds of it your device has malfunctioned, you need to get a repair on this see page 44 here ...
...the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have to send it in for repair. try
shuts off. The power light goes to red and the status light blinks green. AFter a few minutes the power light stays red and the status light cuts off completely. Turns on Hi, have you check the filter
Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...
...red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a defective ...
Question about Mitsubishi Office Equipment & Supplies
...red, the status light is blank. Tried the remote and manually turning it on. My projector won't turn on, only the power light shows red, the status light is blank. Tried the remote and manually ...
14 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions