dell 2200mp mounting screw Purchased a ceiling mount for a dell 2200mp projector. What size screw is used to attach projector to mount? The 3 threaded inserts seem awfully small. Hi wspy If the look ...
...mount screws - and any idea where to get the rear foot screw for a sensible price, or perhaps you could suggest an improvisation? Thanks Brian Hi Brian The $18 footpiece you will unfortunatelly have ...
Question about Acer Office Equipment & Supplies
...screws provided. you'll have to adjust the mount so it matches the projector holes. once it's mounted, you'll have to adjust the image. go into the menu and select ceiling image, and adjust the ...
...mount the HC1600 projector Do I unscrew the level adjusters (3) ? I do not see anything on the bottom that says "ceiling mounting screws here" there are three screw holes on the bottom of the ...
Question about Dwin Office Equipment & Supplies
...simple. Take the unit down as you need to get to the underside. There you will see the retaining screws that hold the cover on. Remove these and open the unit. Inside you will see the bulb and ...
ceiling mounting which holes do i use t mount the tdp s8 on the ceiling? I unscrewed the two rubber stands on the bottom and used those to screw it to the ceiling mount. Seems to work pretty well! HTH
screws? what size bolt will thread into the three brass mounting holes beneath the projector? The brass mounting holes on the bottom of Hitachi data projectors require a 4mm bolt. Typicall 4mm x 10 is
Question about Office Equipment & Supplies
...mount. pls help rick if the projector has places for mounting screws on the bottom of the case, it has an option for ceiling. go into settings for image. right now it may be set to front. select that ...
Hitachi XGA cp-x275 Can this type of projector be installed upside down hanging from the ceiling? Is there a mounting kit available? Thanks for any help. Yes, this unit is made for either or solution.
Question about InFocus Office Equipment & Supplies
...screws that mount into the projector on a circular pattern towards the edge of the projector, whereas the DX3 uses a single screw right in the center of the projector similar to how one would use a ...
35 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions