NEC MultiSync MT1050 Multimedia Projector "projectors three lights" Questions

Panasonic PT-D5500U projector. When I try to power it up - Power light changes from red to green then starts to continuously flash amber three times. After a few minutes the fans stop and projector ...

May i replace LCD Projector Dlp/Dmd chip with DLP projector Dlp/Dmd chip ? LCD projector have only LCD panels in the Projector DLP projector have only DMD chips in the projector there is no DMD chips ...

...three green lights come on then the standby light goes red and remains on when the projector is plugged in. The lamp and fan do not come on when the power button is pressed instead the lamp light ...

three lights more 1. lamp indicator 2. temperature indicator 3. computer input witch one light is flashing RED or illuminated RED with POWER BUTTON orange light. If LAMP INDICATOR light is illuminated

light problem Our sharp projector light is flashing green and will not turn on. I did purchase a new bulb, but it is still doing the same thing. Can you help us? Please.Thanks,Nick Hello Nick, There ...

The projector turned itself off after couple hours of use and the Temp. red light came on. Power Light turned red instead of orange as usual. After 3hrs I turned it back on, cleaned the dust off the ...

I have a problem with our projector. The model is: PT-D3500E and the serial number is: SH5530059. When you switch on the projector the power light goes green after 25 seconds the power light goes ...

I have a problem with our projector. The model is: PT-D3500E and the serial number is: SH5530059. When you switch on the projector the power light goes green after 25 seconds the power light goes ...

three blinking red lights. This should indicate the lamp is bad -- but after turning it off for 1 minute (per instructions), the lamp does restrike successfully. We get a picture, but only for another

rest light imer on sharp pg c45x Turn on projector, press and hold the input, enter and undo buttons on the projector then while still holding those three press the on button. Make sure you do this ...