Status light blinking Status light to repeat blinking 2 times 0.5 second of intervall and off 2.5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 ...
Question about NEC Office Equipment & Supplies
Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...
Status light is flashing Hello, I have a lt35 projector, the status light is flashing and according to the manual this indicates a temp problem. I have left the unit in stanby and then switched off at
...status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started out ...
Question about NEC Office Equipment & Supplies
...Status light error MT 1050 Pressiing start, green light comes on, Lamp lights, Lamp goes out and Red Status light blinks 2 short and 1 long. I have the same issue with mine. Did you ever find a ...
Question about NEC Office Equipment & Supplies
...status light becomes green. The lamp light stays off though (no red, no orange, no green). At this point the fans haven't turned on and the lamp isn't on. Then the status light just ...
Question about NEC Office Equipment & Supplies
...light / status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 ...
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
...status light flashing red on WT610 NEC if the status light is flashing .5 seconds on and 2.5 seconds off - you need to replace the lamp cover correctly. if the status light is flashing .5 seconds on ...
light then goes out, status keeps flashing green for about 20 seconds. Power light then comes on green again and status turns amber, unit shuts off. Tried the "<> power" reset,
9 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions