Banding problem with BenQ W5000 digital projector Both sources through the component video have banding problems. Some techs have said that it could be an issue with the ground loop. Whether I use a 6' or 30' component cable, the issue still more...
buttons probably need a good service. you say you pushed power key twice did you leave a small pause between each push get a tech to checkout underneath keypad buttons to make sure that the contacts are clean. more...
Wanted to post a solution to this problem. Panasonic tech support says the iris is the problem. Upon researching this tidbit, I found this site: http://www.avsforum.com/avs-vb/showthread.php?t=762444 There is much info here on iris problems. more...
how to make a templates?
designing your ouwn templates depends on your creative immagination but a simple techniques
for you to have is to know what particular project you are dwelling on. example: Proposal project of Housing Project, Now think of the more...
are getting a green tint even on the menu then it would be a problem you would need to have addressed by a trained technician. For now, you can try to do a through cleaning and try to dust out the light path. I do not know how deeply more...
old lamp and it showed open so then ordered a new lamp and still the unit will not work. I am a former tv technician from years back and did not get much of a chance to work on these. I see something about a ballast? Where and what more...