volume control When I try to increase or decrease the the volume it just runs from 0 to 15 or 15 to 0 so can only have full or zero volume. The volume control buttons on the projector have stopped ...
Question about InFocus Office Equipment & Supplies
...flashes two red lights. The projector is bloked, you need reset the lamp timer. Press and hold the VOLUME + buttom, then press the VOLUME - buttom. Hold both buttons down for 10
Question about NEC Office Equipment & Supplies
work on several other machines with no problem. The speakers are plugged in and working. The issue seems to be with the jack itself. Is there a way to replace or fix this? The internal speakers on the
turn unit on and see if it works it may do. To reset the lamp hours counter press and hold down the Volume minus button - , then press the source button whilst still holding down the volume button for
Question about InFocus Office Equipment & Supplies
The volume is not working on my IN2102EP, what do I need to do? Your firmware version must be 1.11, if not, you need an actualization. 1- Check keypad and flat cable, (Replace it). 2- Check Speaker, ...
INFOCUS LP250 FLASHING RED INDICATOR try reset the lamp counter by pressing volume +,- keys together, may be fans not working or faulty lamp, check both
Question about InFocus Office Equipment & Supplies
...work, I cannot confirm the reset of the lamp hours ... I took the projector covers off to see if the "VOLUME -" switch was not making contact (which would create the condition where the lamp hours ...
Question about Dell Office Equipment & Supplies
...and I cannot get any sound. What do I do? sound form your projector? or from your speakers? set the volume of your projector to maximum. then check your connection cables if good your speakers if ...
work properly, the volume does not turn down. My son stepped on the cord from the projector, now the sub does not work, looking at the unit you can see the input for the sub is cracked I don't know if
...to reset the lamp timer and it has reached it's limit which can be reset by pressing both the volume up and volume down buttons on the the projector simultaneously for 10 seconds. This will ...
62 questions posted
Usually answered in minutes!
75 Questions
39 Questions
27 Questions
39 Questions
25 Questions