Mackie Srm 350 "speaker fuse" Questions

...up the speaker's back component... what is next/where they do they go? These are passive speakers, so if there is a fuse at all it will be as a high frequency protection circuit on the

...speaker cable could cause this... however, what you do is to replace the fuse BUT wire a 150 Watt lamp in series with the power input... This acts as a resetable fuse for testing. If the lamp stays ...

...like someone painted it on there. Red Dot Lamp. any parts distributer for people like Harbinger, Peavey, and B52 will KNOW what your talking about do you know what fuse this speaker use the pr15 ...

...speaker, check the fuse first. It is located on the AC plug circuit board. You can download the PDF for the HS series here. It includes all of the circuit diagrams, parts lists and close-up photos of ...

fuse has blown on the speaker out circet on my new amp any ideas why this would happen? The fuse blew because of excess current. The cause of the excess current is either excess volume, a short in the

...fuse. If too much power was sent or an amplifier drove DC to the speaker, the voice coil may have fried. The specs do NOT brag aboput protection, so it is likely either the speaker is blown or the ...

...the exact proper furse that the manufacture recomends. If the load (speaker and wiring) is correct and the fuse is correct and still blows then you have a component problem and the amp will need ...

fuse in the speaker leads. If the fuse blows, you have saved another speaker and you are DRIVING them too hard. For greater safety make the fuse a 7.5 amp fast blow. Also get a sound meter. The max on

...fuse for this speaker??? This speaker at full power draws average 1.3A at 230V and 2.5A at 120V. Mackie's recommended fuses are in line with this so your fuse is actually too high a rating. It is ...