...remote control for this product anymore. The 'status' light is continually red and the 'power' light is orange. The problem is that I cannot turn on the projector to reset the status of the lamp - or ...
...should replace the lamp. To reset the timer you need the remote control, with the unit plugged in in standby mode hold down the power off button for 30 to 45 seconds until the status light goes
...status light turns red. Whats wrong? hi replace or clean the Air filters. Run the lamp reset command if you have.if not solved then check ballast unit which ignites the lamp. try this also, press the ...
Question about NEC Office Equipment & Supplies
status red light. I bought a remote controller because some site says it will cure the problem if pressed the off button for couple of seconds, but never fix the problem. Holding down the "OFF" key on
...status light lit (not flashing) Using the remote control, hold down the power off button for 30-45 seconds This will reset the status button, removing the red light Power up the projector and select ...
15 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions