Question about NEC Office Equipment & Supplies
...red status light. I saw that it may be a temperature error. I took off all the filters cleaned them ran a vacuum though the unit, that didn't work so I aimed a fan at it and it still does the same ...
Question about NEC Office Equipment & Supplies
red status light, overheated. I have a vt440k and the power light is orange and the status light is flashing red. Its strange the manual says there are 4 , 8, 12 second intervals that it can flash but
Question about NEC Office Equipment & Supplies
what does it means if my nec mt1050 have steady orange light on power and 6 seconds interval red light on status light. www.ccc.commnet.edu/.../equipmanuals/NE. See if htis site is of any assistance
status is red The NEC?s work on a reducing time basis, they count the hours that they have been operational and refer to this as the life of the bulb ? 1600 hours. When the 1600 hours has been reached
...status light turns red. Whats wrong? hi replace or clean the Air filters. Run the lamp reset command if you have.if not solved then check ballast unit which ignites the lamp. try this also, press the ...
status' light is continually red and the 'power' light is orange. The problem is that I cannot turn on the projector to reset the status of the lamp - or do anything else. It simply does not shoot any
...Red status light. Some of the NEC units have a standby status when the lamplife has exceeded its safe limit, the unit I had needed the off button pressing for up to 20 seconds to reset the lamplife ...
...status light flashes red. With out knowing the state of the power LED, my best guess is the Status light is solid red and telling you to purchase a replacement lamp before the current one dies. ...
Question about InFocus Office Equipment & Supplies
only Lamp status lights up red when power is plugged in on DP 9290 it needs a new bulb - sorry
...status light stay on red? If it does then the lamp timer has exspired and will not let the projector turn back on until it is reset, at which time you should replace the lamp. To reset the timer you ...
1 questions posted
Usually answered in minutes!
75 Questions
41 Questions
39 Questions
27 Questions
39 Questions