JBL Creature III 2 Speakers "open speaker" Questions

...open the right speaker since the volume button is loose or broke. I took the metalic mesh off and unscrewed the 4 screws that hold the speaker but I can't pull it out and I don't want to force it. Is ...

open the speaker. Any suggestions. Thanx Badri i had to break it to get the satellite speaker open. once it was open, i looked to see if there was a simpler way i could have do it. much to my suprise-

...open speaker cabinet! think the speaker is trash? Hi Phineasj It is possible the speaker is bad, and defective, time to change,or repair, or RMS, try carefully, open and see the cables, you also can ...

...I need to replace the wiring coming out of the speaker. Hope there is help our there. Thanks Open the satellite speaker's metal mesh with a steel needle. then u will find the inside screws to open

...open the speaker by unscrewing four screws using a philips star screwdriver. Once opened, you can spot the pot (brown circular device). mostly it requires only cleaning. You can use a syringe to pour ...

I want to open my speakers Hi, I want to open my speakers, i´ve unscrewed but it won´t come out. What else do i need to do to open up my speakers? thx usually they have a clamping mechanism.

open the net over the speaker...top bottom corner there is a hole then in this hole put a strength stick pressure heavy by side..then it will show u crack by this crack u have to open it!!remind there

...open speaker cabiant.Bose companion 2. currently trouble shooting Bose Companion 2 computer speakers, no sound from speaker, would like to know how to open cabinet to see if wires are attached to ...

...open look for Speaker setup click on the little blue V, go down and click on Surround sound speakers now click Apply then OK and OK again. It should work correctly now. Thanks for choosing FixYa, If ...

...open up the casing of the horizontal speaker and 2. do you have any other suggestions of what the flapping noise might be? once you take off the screws you pry the circuit out as it is glued in to ...