where is the hi temp limit switch located? where is the hi temp limit switch located on jandy LX where is the high temp limit switch located on my laars 44000 pool heater
how to chek hi limit switch pool heater does not fire up,hi limit switch blinking on lcd jump highlimit to see if it lights if so replace
...hi limit switches, water pressure switches. Check for continuity and the wiring between the hi limit switches and the water pressure switch. Also, check to make sure the filter is clean and the pump ...
Hi Limit Switch error This is the 6th time in 4 or 5 years that we've had a Hi Limit Switch error preventing the heater from firing on our Laars Lt. I was told last season by a tech that this ...
Hi limits, air pressure switch all of which have 2 wires going to them. Unplug one item and connect the 2 wires together ( paper clip works fine ) Then retest, if problem does not go away remove paper
...HI" all the time? This means that either there is a bad high limit switch, or you are getting a bad burn, or the pump is not moving water fast enough. With the power off remove the panel on the ...
...HI. but my temp is not warm The error code is HL, not hiThis is telling you the high limit switch is tripping(safety feature)Lack of flow, corroded heat exchanger, bad high limit switch, bad thermal ...
...hi limit switches, this will be easy. You will need one wire going from one limit switch to the other. (on any terminal) take either of the incoming wires from the old limit wiring and connect to ...
...HI-E2 350K pool heater vent limit switch is resetting, flow is fast and good, but water temp is getting over 140 and kicking vent limit switch out the vent switch is for the exhaust. the 135 high ...
14 questions posted
Usually answered in minutes!
102 Questions
61 Questions
34 Questions
31 Questions
