Hyundai ImageQuest HQL260WR 26 in. HD-Ready LCD Television "main board" Questions

...main board. no 12 or 24 volt power. has a new power board and inverter boards. The main board is defective the power on command originates from the main board and thats what gives the signal to start ...

...main board, thinking it may be the main board (KE558FM51s. Yes,this problem are related to the main Tuner signal board,must change the main Tuner signal board,to solved this problem.Put back your old ...

...Main video board I got 2 main control boards but still no pic so I was told to look for main video board if someone has good video board or if you need main control board I could exchange or sell you ...

...main board is connected the backlights fail to switch on, any thoughts? The TV failed a while ago, I took back off and disconnected the main board. With the main board the backlights illuminate. With ...

...plug from the main board relay clicking stop ,posible faulty main board? no relay clicking when i disconnect the output plug going to main board possible faulty main board? REPLACE ALL THE BOARDS

...main pc board? Hi, First of all the power supply makes 'Stand By 5 or 3.5V which goes to main board. When we give power on command to the TV the main board sends 'stand by or Power ON' command to the ...

board or main board?? Model LNT3732H Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked

...Main board bad need this one repaired or new one but Akai dont have it can you help? See I cant cross that part number and I have all the boards sitting in front of me. That number is the akai part ...

...main board for a Proview, MDL # HV205 LC TV. In need of a main board. I need to purchase a main board for a ProView, MDL # HV205 LCD Television, where can I purchase this main board? Tries Websites ...

...main board, Y Scan drive, CTRL Board, Main Power Supply, and X Main Board. The relay clicking on the main board has stopped, but still no picture and no sound. The main board relay resets after about ...