...filter. the pressure is way up. now the spa is draining into the pool and the fill lines into the spa are shooting harder than i've ever seen. what's up? it sounds like your valving for the return ...
...Spa model 23055. the heater stopped heating, so I turned it off, cleaned the filter and now it won't even run The blower will run, but not the filter. Is there some way to backwash the system? there ...
...spa pump? I turn my pump on and the motor does not run. I get error code E90. I changed the filter and ran water through the filter spouts and it still give me error code E90. You have an owners ...
...Spa however we do not sell anything other than the replacement filter so I cannot tell you what is all included with that part number. I would suggest you contact the store you purchased the spa from ...
...on balboa spa control # B120DP Problem pump dose not shut off when satisfied temp If you have a user manual check the filter duration isn't set to continuous. Regards, Ian ...
SAYS TO CLEAN FILTER. HOW DO YOU DO THIS If you have a sand filter you just backwash it. If you have a DE filter you need to backwash then recharge with the correct amount of DE.If you have a ...
I think air got into the pool filter and now it has no suction what do I do to resolve the problem There should be an air bleed valve at the pump. If not check or loosen the filter top to get the air ...
...spa tub and filter pump are not blocked. • If problem persists, contact Intex Service Center. ...
4 questions posted
Usually answered in minutes!
1,045 Questions
287 Questions
93 Questions
43 Questions
29 Questions
