Lite On LVW-5005 DVD Recorder "repair video power" Questions

power problem Hello, This panasonic dvd/video recorder was powering itself on and off and is now completely dead. I checked fuse and a is ok. Is this worth repairing?? the machine is only 13 months ...

...video if is broken or break, repair or replace.4) if this is o.k5) test the power supply the voltage for digital is +5Vdc, for Video +15-15vdc. IF this missing repair the power supply.6) test the VCC ...

video of the repair. If you have the same problem I had then when you turn on your recorder it will only display the Hello message on the front of the unit (perhaps very dim) and the blue light on the

...power up The DVD Video keeps swicthing it's self of when you turn it on. I have power going to the unit. I have read the manual, which said power down then power up. I have done this but it still ...

...video processor, or its associative circuitry. I would suggest that you have a qualified TV repair technician look at your device and give you an estimate on the repair cost. I hope this helps, Thank ...

and repairing the of the possible cold solder joints do not repair the problem, you probably have a bad video chip and should replace the dvd player.I hope this information helps you with your problem

...power down because I couldn't get a video signal. When I turned the player back on the words "power on" displayed and then the player freezes. I can't do anything past that point with the player or ...

...video cassette tapes that are new and used and have the record tabs in place for recording and not. This just started. Has been working fine otherwise for years. You need to take the cover off and ...

...Video, composite? Have you tried another method? Sounds like you could have a faulty cable... This could be a back light problem with either the lamp itself or the inverter power supply. You should ...

...it still asks you wait then you have an initialisation fault where it needs to be reflashed or