Pentax K1000 35mm SLR Camera "rewinding film" Questions

...reel. On the film cartridge, turn on the long tube in the middle clockwise to wind all the film back into the cartridge. If you had the back opened briefly, do manual film rewinding in the dark

rewinding. Film advance: Automatic. Single-frame and continuous (1 fps). Automatically rewinds film leader into cartridge when designated number of frames have been exposed (midroll rewind available).

how do i rewind the film in my nikon n2020 Set the film advance mode selector to L. While sliding film rewind lever, push film rewind button. Fold out film rewind crank and rotate until film advance ...

can't rewind film i don't know how to rewind film in my nikon N80 It should automatically rewind when the roll is at the end. For mid-roll rewind press both the rewind buttons simultaneously for about

...film rewinds. Normally it is default to rewinding automatically at the end of a film. If this setting has been changed, or you want to rewind a film before the end - you need to press two buttons and ...

how can you rewind the film Lift up the rewind crank. Press the film rewind button on the bottom of the camera and turn the crank clockwise. Rewind until the tension on the crank lessens, indicating ...

how do you change the film in a minolta x-370n? push in the rewind button on the bottom of the camera. turn the rewind knob to the right until all the film is rewound into the film canister. pull up ...

...film) is just not rewinding after its over. I accidentally opened it ...and must have fogged the film ...but I am more concerned now about the malfunction. Even tried the mid-roll rewind button, ...

is there a manual rewind on nikon n65? If by manual you mean turning a crank to rewind the film, no. If you mean to do it at a point other than the end of the roll, yes. To rewind film mid-roll, press

...rewinding the film on its own. I have new rechargable battereis. The camera shouldn't be doing this, assuming you're using 36 exposure (or 24 exposure) film. You may want to set a custom function to ...