Chamberlain 12HP Power Drive Chain Drive Garage Access System "blinks" Questions

reversing sensor blinking Left hand side reversing sensor blinking.This obsructs the door from closing with the wireless remote.Closes only when main wall control depressed continuosly, then door ...

...I get it to stay on for about 5 minutes? Try this: Press and hold the Lock button until the light blinks (about 10 seconds). A single blink indicates that the timer is reset to 1 1/2 minutes.

wall opener blinks but will open & close door. wall opener blinks . car unit will not operate the opener. It blinks at the green eye on the opener but will not open. This all happened when I ...

sensor lights blink contineously on one side and sensor lights blinks on one side and door does not close Tweak the sensors so that they are pointed at one another. This should stop the blinking and ...

...The LED indicator on the back is constantly blinking. If I trip the motion sensor it slowly blinks 4 times and has a pause before going back to the rapid and constant blinking. What does this ...

Garage door won't shut, light blinks 10 times. The door closes a couple of inches, then stops and the light blinks 10 times. Both sensors are green. HELP! If the light blinks 10 times it is a sensor ...

the green light on the wall switch is blinking con... The green light on the wall switch is blinking constantly yet it works to open/close the door. The remote does not work. Any suggestions? Press ...

...nothing works...what happen? If that LED is blinking a code let me know what it is. For instance 5 blinks and a pause then repeats. If it is just blinking randomly that is

the button on wall which has a little green lite in the center, keeps blinking, but the garage door does open Press and hold the lock button for 3 seconds to stop the light from blinking. That ...

...to 1½, 2½ or 3½ minutes as follows: Press and hold the Lock button until the light blinks (about 10 seconds). A single blink indicates the the time is reset to 1½ minutes.