diaphragm assembly. What I have done is to very carefully (while using good magnification) pry up on the edges of the lens cover metal edging on the inside edges. This will release the pressure on the
lens is fine but the diaphragm coupling mechanism inside mirror box ( on the left hand side if viewed from the front ) is not engaging the lens properly so that your lens stays fully closed ( F 22 /16
...dirty (clean them carefully, also in the camera body.) 3) The minimal aperture coupling SW broken (camera body) or aperture coupling in diaphragm ring is also broken. 4) Lens damaged CPU. Best ...
diaphragm. Use rear element lens caps on your lenses when they are not on the body. Wide angle lenses, by design, have rear elements that extend out farther then the lens barrel and are susceptible to
...diaphragm motor) and, as the lens is retractable and there is a zoom mechanism, it forms a loop, so it can extend and retract along with the housing. In my camera, this wire formed a crack right in ...
...lens in incompatible or has a diaphragm problem. ( it will also display e99 if the shutter or flash unit is not ok but this does not apply here ). This is how you can check whether the diaphragm ...
...the diaphragm opening in the camera body. Check this: point the lens towards you notice that the diaphragm is closed. To avoid more costly damage you take it to a workshop for servicing. Best ...
...now you could have a problem with lens. If you have bundle lens like 18-55 and some other lens have power diaphragm circuitry broken causes communication problem. you can ask your local repair ...
lens, you see a diaphragm movement or hear a click on the lens, if not the flat wire is broken (means microcut inside flat invisible without a magnifying glass). Most time same problem is present with
118 questions posted
Usually answered in minutes!
155 Questions
159 Questions
118 Questions
101 Questions
103 Questions