Echo Gas Blower 135 MPH390 CFM Blower PB250 "getting fire leaf" Questions

...and it would not start. I changed the plug, cleaned the carburetor, A friend checked it and said it was not getting fire. any suggestions? if its not getting any fire then check the coil it may be ...

fire getting to the spark-plug. I eliminated the on/off switch but it still won't fire. Where can I get a owner/repair manual for it? Mcculloch MB3202 anti-vibration back pack leaf blower, runs better

getting spark and gas but won't start,it will fire once and a while and pop but that it,help Check compression, vacuum and pressure check, ring seized to the piston. Also if you haven't replaced the ...

...leaf blower quits after getting hot Hello: This is Usually Caused by a Bad Ign Coil/Module. Replace the Ign Coil/Module and the Problem should be Corrected unless the Rings are Worn Out. Operate the ...

...getting fire its just a simple kill switch grounding out your fire!! Now if you can't get fire either way get a voltage meeter put it to the terminals and if you get any electricity and no fire ...

...getting fire from the coil if not you will need to replace it. If you change the coil be sure to note the air gap between the coil and the flywheel then set the new one to approx. the same distance. ...

gas leaf blower has spark, is getting gas but will not fire????? worn piston rings...no compression...if it's less than $150 to buy, get a new one...repair will be at least that...

...leaf blower will not fire. no spark at plug. It may be the coil if there is not any spark. Or a wire could off at the coil. One more thing it could be is the spark plug wire may have came loose from ...

getting gas. This model has a stop switch and I wonder if this switch is stuck on "stop"? Is that possible? yes, it is. i suggest checking to make sure the plug is firing--you can check by removing it

My FL1500I Weedeater leaf blower isn't getting fire to the spark plug. Any idea why? unplug the kill switch and see what happens