Mitsubishi WS-55511 55" Rear Projection Television "remove stuck screws back tv" Questions

...Remove the two thumb screws on the back sides to unlock the speaker grill. It will have 3 very tough snaps also holding it on. Once you get that off you will find the lamp door. If the thumb screws ...

stuck changing through each device while staying on the original connection (Ant A). I've tried resetting even unplugging for a prolonged period of time. I had a similar problem: my WS-55511 would not

...stuck. Stubborn Convergence board. I have the back and front off my Hitachi 53UDX10B rear projection TV. I've released the six plastic tabs that hold down the convergence board, but the board won't ...

...stuck email me at [email protected] if this helps Bad DM module = expensive repair Mits rebuilt = 1-800-553-7278 PS. Exact repair info available if you want it.......T. Front panel buttons (switches) ...

...stuck on 14 after screen was hit? How do i fix it? Your front panel buttons may be pushed in not allowing it to change channels. The only way to access this is to remove the speaker grille . Most are ...

...stuck in 3d mode, how do I fix it?? Its got red and green lines everywhere. It was in storage outside for 6 months as well It has dust on the lenses. My RCA rear projection uses a 7/64" allen key. ...

stuck in player on tv, and I cannot get it out even when I use the reject button on TV or on remote control. How do I get it out? Margaret easy....u will need to open the dvd player but remove it from

...screws on the bottom back of the screen. there should be one on the bottom right & bottom left. the ones on my tv were easily taken off with my hands. after you do that, go to the front of the tv. ...

...stuck please help Set needs convergence ic's changed (STK392-110). Also look for resistors slightly discolored around STKs, usually low value like 1.5 ohm, 2.7 and 3.3 If you have an ohm meter and a ...

...stuck closed. Try pecking on it first. My remote stopped working but so did the manual buttons too. While poking around on stuff I swished my finger across the buttons and it all started working so I ...