Mitsubishi WS-55511 55" Rear Projection Television "eye tv signal fix" Questions

eye on the tv, it will work. It appears to be a problem with the remote receiver on the tv. Any suggestions on fixing this? You will need to replace the "HA" board wich is the control panel and remote

...eye on it and if there is another problem with it, reply here and we will try to work it out. THIS MAY ALSO MEAN THAT THE LAMP IS LOSING HRS AND NEEDS TO BE REPLACED My mitsubishi rear projection tv ...

...TV (antenna, component, etc.) and I DO notice a similar but far more faint image that I would almost never have seen if I had not been looking for it. My question is threefold: 1. Is this a form of ...

...TV or risk perminant eye damage. (Hurts like hell looking at the exposed bright light without the UV glasses and WILL indeed degrade your eyesite, even if just looking at the light for less than a ...

...21) Wait a few seconds. Turn the TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps

TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps properly)" Perform full convergence procedure

...TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps properly) End: For those of you with newer ...

...TV's have a built in Self- Diagnosis function. If the timer/standby indicator is blinking, this could be an indication of the problem with the unit. The diagnostic blinking will occur automatically ...

TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps properly) Dear Sir, ic8002 and ic8001 are the

...seconds. Turn the TV on, and you should have your normal signal. Press Magic Focus button just to make sure the magic focus still works (and that you did the last few steps properly) Hope this ...