Mitsubishi WS-65511 65" Rear Projection Television "convergence diagnosing" Questions

Mitsubishi WS-55511 convergence problem? On my Mitsubishi WS-55511 all of a sudden the image is showing double. I was watching TV and suddenly this occured. The behavior is as follows: While watching ...

HD52W59 Convergence Power Supply I had a retired TV repairman diagnose my tv, said a transistor and two resistors blew on the convergence power supply board. I have the board in front of me, part ...

...in 2006. The picture has a "curved" appearance and the colors blurr together. Failed convergence circuit and the problem can be the convergence power supply, convergence amp bd. or

I have a Sony KP53hs30 that may have convergence ,,, it seems to converge in the middle, the top and the bottom are bady bowed,,, could it just be a fuse or is it the stk's ? no fuse related to this ...

convergence problem, now there is a smell of burning,and the tv will not turn on The bias resistors have smoked and also taken out the convergence ic's. Best advise, have a qualified tech diagnose it.

picture not clear it's like it's in 3-D and it's blurry CONVERGENCE problem.. with convergence problems on these sets i always start the diagnoses with some questions. IS the picture curved in at top ...

...43H70 I BOUGHT IN 2001 AND THE RED AND BLUE ARE OFF ON THE RIGHT SIDE. I HAVE TRIED TO USE THE CONVERGENCE BOARD TO STRAIGHTEN BUT MY RED WILLNOT MOVE TOWARD THE BLUE OR GREEN. ON NUMBER 1,3,7 ...

No convergence My convergence choice on the menu selection to automatically coverge my tv has totally disappeared. Because I wasn't there at the time when it started I'm unsure if there was a power ...

...red will not converge when trying to do a manual converge. I read through several forums that the convergence IC could be bad. Any idea where to buy a convergence IC, and what the actual part name ...

...then horitontel lines became waivy. After reading this website I diagnosed the problem as being the convergence. Now after this weekend the picture will not come on and I only hear the sound. Is it ...