Mitsubishi VS-45607 45" Rear Projection Television "vertical wavy picture" Questions

...wavy. After approx 10 minutes it settles down and bocomes steady. What do you believe is the likely problemand the approximate cost to fix it? Thanks In general, these problems are usually caused by ...

...wavy, shadowy, vertical lines. When connected to the DVD, the picture is better, but still not as sharp as it used to be and still has the wavy, shadowy, vertical lines. The unit is an older (1994) ...

...out. any ideas? is that wavy in vertical motion? and bending? in that case maybe you have low voltage in your power inlet! or can you specify the color of wave and motion, if horizontal or

vertical hold wavy then no picture and power lite flashing no picture power lite flashing when plugged in. at first vertical hold wavy then warm up and picture would stablize you are probably having 2

wavy picture vertically I have an apex gb5108 and have a wavy picture. gets worse the longer the tv is on if you have the speakers on top of the television or a phone near it might becaused by this

...wavy distortions. It has worsened now to almost half of the size of the pictures. What is up? Can this be repaired? Estimated cost? The sent is about 6 years old. Thaks. James Hello! That can be ...

wavy vertical border the horizotal borders are straight. this seems to show up on the screen as wavy colors interlaced with each other. you can move the guns around with the convergence control on the

vertical wavy lines and static like on everything. When it warms up the picture has degraded over time from being very good to having vertical strips and anything on the screen has a repeating outline

...wavy picture points to a power supply problem. Even after the digital changeover in Feb., the vertical scan rate (the pace at which the picture is built from the top to the bottom), will still be ...

...My Panasonic projection TV model PT53WX42, suddenly now has a wavy horizontal picture at both the bottom of the screen and the top. Any suggestions? Thanks the vertical IC outpt needs to be ...