Mitsubishi VS-45607 45" Rear Projection Television "jumpy tv screen" Questions

and the lines are jumpy. Its start doing this after the tv has been on for about 20 minutes. Can you tell me what I can check or replace you have loose connections on the boards, or capacitors leaking

...TV was fine, but same day after work I turned it on and you can see the progam in the background and the audio is fine, but the green is jumpy, the bottom of the screen shrinks up to a wide hill and ...

...jumpy or like slow motion but sound is fine? What might be wrong and with age is even worth trying? The tv setting may be on AUTO. This can be changed at any time to wide screen, panorama, etc. I ...

Jumpy / Schrolling Picture...? My problem started last night. The picture on the screen started "jumping" almost like the cameraman was running when filming? Now the picture "schrolls" a bit down the ...

tv? the red will not converge and is jumpy These sets have several common problems which are listed below. Problem #1) Convergence Yours may have one or more of the following symptoms Screen Looks 3-D

jumpy. wondering if there is a solution and/or how much to fix? i was given the tv so if only a few hundred, still a cheap tv. unit has 2 problems the convergance amps have failed and your hyper board

...jumpy and sometimes u get colored bars. Your problem is the MICOM board. It is a standup board the plugs into the main board. It is basically the "brains" of the tv. It does all of your video ...

jumpy. It lightens up after about 15 minutes, but today the horizontal lines and jumping has continued for the last two hours. Is it fixable? I love this tv. Sue Its definately fixable. Can you post a

...jumpy image I have a mitsubishi big screen 60 inch projection tv model VS60-607 manufactured in 2001. My problem is that the image on the screen is "jumpy" and has "scrolling lines". I thought at ...

...tv without horizontal lines and jumpy screen. sometimes worse than others, jumps then clears on own at will. audio always works fine Your problem is capacitors CP204 and CP205 by the 9 volt regulator ...