Mitsubishi VS-60707 60" Rear Projection Television "remove front" Questions

...remove the front screen housing and return the screen to the original condition? 1) Remove lower,front speaker grill 2) Remove screws along bottom edge of screen frame 3) Lift screen assembly off ...

Front Grille, remove the connectors from POWER SW Assy, FRONT INPUT Assy and FRONT LED Assy and remove the Grille. This set is not turned on the power in the state that removed the connectors. At this

remove the back bottom skirt from television in order to get to the screws for the front bottom panel. When the front bottom panel is removed there will be more screws visible, for front screen. After

...remove the front screen for transport. the back panel is off. how do i remove the front screen panel? You need to take the front grill off. There are two screws on the front at the very bottom. They ...

...vision 50" projection, I dont recall the proceedure, does anyone know how this is done??? Thanks, Jim Remove front bottom cover then remove all screws holding screen on Now slide screen up and

...remove the front speaker cover? I just read your entry "... you have to take off the front speaker cover and a small panel under it..." How do you remove the front speaker covers? I don't want to ...

...Remove all screws behind the front plastic section. From the rear, now remove the light engine & chassis to gain access to the 4 hidden screws. Once this is done the front bezel can then be ...

remove front plate below screen (where you may access the lamp as most of these are taken out from front)2. Remove all the screws ON THE BACK OF THE SET around the top and both sides.3. Remove a plate

harness plugs need to be disconnect to remove completely front screen. Below exploded view of Mitsubishi VS-50607 will help you to remove front screen to clean inside. Be careful while removing screen

...remove the front panel after loosening the two large screws on the back. The ends come loose, but I can't get the center to break loose. I feel that if I pull in the center any harder it will break ...