Question about Benjamin Moore ben Tools & Hardware - Others
...spray paint to do this project, if yes you have what is called fogging. To repaint tape off the area you do not want to paint. Shake the can well until you hear the metal ball bouncing freely. Start ...
...spray paint but it will not dry. What can I do? Could be the paint you're using was old, sat around too long and was not properly stirred, before applying? or did you apply multiple coats without ...
Question about Tools & Hardware - Others
...spray paint by Sherwin Williams (Krylon) . It does a great job sticking to plastic without primer, and also has a durable finish. The finish is glossy, but not with much depth. To achieve that deeper ...
paint was used, most of the time it is, spray the area with warm water then use a flat scraper to remove.. It is very messy when doing a large area. Cover as many surfaces as you can to protect. Try a
...then sand so it is flush with wall. Good answer I would also buy a can of knock down texture and spray it own to match the existing ...
Question about Timbermate Tools & Hardware - Others
...repairs with shellac or another sealant to provide a barrier between the filler and the paint. Spray shellac is available in hardware stores, and is used on water stained ceilings before
Question about Rustoleum Tools & Hardware - Others
spray paint on metal door cracked in some spots. first coats were fine and then just a few place cracked. how can we fix this? Repainting without adequate drying time will cause this. Make sure paint ...
1 questions posted
Usually answered in minutes!
3 Questions
1 Questions
1 Questions