Mitsubishi VS-55601 55" Rear Projection Television "red cross hairs" Questions

...Red cross-hairs. Once they were perfectly aligned you would again see one Yellow cross-hair. Choosing Blue Convergence would bring up a Blue cross-hair in the center of the screen. If the alignment ...

...cross hairs in line with the red and green. This is only on the left hand side of the screen locations 1,4 & 7. All others locations, center, top and bottom will algin perfectly. The blue cross hair ...

...cross hairs, maybe by covering red and green lenses the blue will show on screen. anyway when done and cross hairs are clear,lenses, mirror and screen are clean, you can adjust covergence and get a ...

...cross. on blue or red convergence the navigator will set the cross but in mult point it only moves around to ech indivdual cross. i don't have the owners manual and would appreciate any help. Thanks ...

red and blue lines on top of the green "cross hair". You should be able to use the front panel controls to move the red and blue around. If you can move them around and they just won't move completely

...cross hairs (wont go left or right) as well as not getting all the crosses to match up. What parts do you reccomend starting with the green line will not move. it is stationery and red and blue have ...

...Red Convergence appears first by default. 5. Colored cross-hairs show the current adjustment position on the grid. To move the cross-hairs to a different position, use the CH+/- buttons on the remote ...

cross hairs turn white. I believe Green is not adjustable intentionally. The procedure is to adjust the vertical Red line until it alligns with the Green line. Then adjust the vertical Blue line until

...red tube cross is low on the manual adjustment and will not go up to the other colors.IT moves up and down,but it is starting about 3in.below the cross hairs. Any help? It sounds like you jostled the ...

Red cross hairs can only be adjusted side to side not up and down. Tech calibration mode red lines at top skew down and bottom ones skew up towards the center. I first tried to adjust the cross hairs.