...vertical IC,still experienceing the same problem. the rear projection tubes are barely lite up. Could it be the flyback(the thing with the 4 red wires going into it from the tubes. Is it hard to ...
...vertical IC and available several places here in the states. If you can go online try acme enterprises in Florida for the best prices. http://www.acme-sales.net/index.shtmlAt ACME they're 1.79 ...
vertical ic issues. If they are different colored lines & the picture also bends, it's a convergence problem. Else suspect a vertical problem. In the case of vertical issues, most of the time it's
...vertical output IC first as that may solve the problem. A repair facility will very seldom do board component level repairs, and they will be automatically wanting to change the large signal board ...
...vertical output ic problem could be it needs to be resoldered or could be defective and needs to be replaced if you are handy you can do the repair yourself a repair shop would be at least about ...
...vertical ic's not enough info and a picture would be nice. Regards What About Bob Brand and mod # please Replace IC's with ZENITH part number for STK392-110 or with TOSHIBA or NAP or PANASONIC or any ...
...vertical IC to go bad. The fuse in a TV set is only there to keep your house from burning down if there is a problem. Your set has a problem. In my area repair should cost you about 100 to 120$. Tube ...
...vertical IC. The are a fe instances that it could just be a resistor that has opened or increased its resistance. Basic tools (DVM, soldering iron hand tools) should be enough. Perhaps you would not ...
...more than 10 years old though and you are really taking a chance. Look for a manufactures date. Thanks Yeah, vertical IC might having a cold solder joints. Resoldering its pins may solve it
31 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions
