Mitsubishi VS-50603 50" Rear Projection Television "light switch 2 3" Questions

...2 and works properly. When inserted in HDMI 3, the screen blinks on and off with picture and sound from cable box. have you tried resetting your cable box? you can do this usually by either holding ...

...2 > Power) but it didn't work. Any suggestions? Remove your new bulb and examine the connector carefully. The inexpensive replacement bulbs tend to arc and ruin your $700 ballast; sad to say. If ...

light is blinking. I took the door off and put it back on and the TV now works again. THANK YOU ALL FOR YOUR HELP YOU SAVED ME A LOT OF $$$$$$ on a service call. Lamp door error. Make sure the door is

Standby light flashes 3 times on sony wega kdf50e2000 3 blinks is lamp door loose or lamp not seated well, or 1 of these 2 sensor switches are bad.

light will blink 3 times. If this is the lamp door switch where is that located? THERE ARE 2 SWITCHES IN THE TV THAT WILL GENERATE 3 BLINK SHUTDOWN ONE FOR THE LAMP DOOR AND ONE FOR THE LAMP ITSELF. I

It will not come on with a blinking yellow light and a code of 3 green and 2 green blinking lights. Error code 32 indicates lamp cover open, also check the lamp cover switch

switch it on remains powered for about 2 seconds before switching back off again... DO THE SELF CHECK THIS SET HAS: WHEN POWER LIGHT GOES OUT-----ON FRONT OF SET PRESS AND HOLD BOTH THE MENU AND INPUT

...light system, so I can not switch the inverter boards. I have not looked to see if the entire back light and inverters can be switched. Is the problem the inverters or the LCD sub board? Thanks it is ...

...light then blinks 3 times again Check the lamp door switch. This switch is really cheaply made. The switch is not available. short rhe wires to fix the problem. then never change the lamp witout ...

...Light 3-2 pattern. 1. Replaced the 7 Capacitors 2. Replaced the one large IC Chip. What would/could be the posibly next step(s) to try?? I thought about replaceing a few transistors (shooting in the ...