Mitsubishi VS-50603 50" Rear Projection Television "led tv light leakage" Questions

...tv?U got power LED light flashes or no LED light at all?Check for DM power supply board,for dying leakage bulges up capacitors on it tops or puffing up on it tops.Replaced dying capacitors."LAMP"LED ...

...TV(HL-S5679WX)- STANDBY, LED AND TIMER LIGHTS ARE BLINKING, WILL NOT POWER ON. Check the capacitors on the power supply first. If any have domed tops or signs of leakage, replace them. I had two go ...

...led and the error code indicates 41 (short detected). Any suggestions. PS. I replaced two caps on the power board 6 months ago and the TV worked fine after words. A steady red light: there is a short ...

...LED automatically turns on, it does not blink just a solid light. TV set will not turn on Good Day, jessayala; It sounds like you may have Ethylene Glycol on the boards, leakage from the TV's CRT's. ...

LED light on the front will blink in no specific order and the tv clicks on and off a few times and then stays off. All three fans work. I get all correct voltages on BP41-00268B card connectors CN100

...LED DLP TV,DC2 Main power supply: BP44-01001A SMPS-DLP TV PN082DPS-VF(A),AC/DC,90V-132 A quick Google search for these part number (BP96-01726B & BP44-01001A) will reveal many sources, and ...

...TV on and then it cut itself off after about 2-3 seconds. Not even enough time for a picture to show. Has anyone had this problem? HELP! Maria Good Day y'all; First I will tell you what the factory ...

...tv and plugged back in. Green light blinked 2-3 times and then nothing, not able to power up machine. Daniel Hi, the first three flashes when the set is plugged in indicate whether or not the ...

...led blinks means--- Continuous blink once a second, no pausing - No reply from the jungle IC301 (data bus is busy, shorted to ground, or held high), IK video path is defective. One blink - not used ...

...TV comes on and other times you get flashing, then change the switching regulator on the "G" board or check connections. Make sure the regulator is -12 or -13 (negitive). Ten blinks - Check Q8014 and ...