Mitsubishi VS-5059 50" Rear Projection Television "blue red videos" Questions

red and blue)to regular video inputs (yellow) end will have same effect. make sure that if you are using component signal from DVD player you have to connected to component input in the set. component

red and blue, but when i go to sector adjustments, the blue wont adjust, left or right. It will adjust up and down, and the red works fine. Is this something i can fix, and if so how? This is a common

...green, red, and blue were on. After 10 seconds the red and green faded out leaving only the blue on (the red and green went dark). IE. the same time that the picture of course turns completely

...red and blue are cover overlays to make the image display properly. So if everything looks plugged in right, then try plugging in a composite video (Yellow) or S-video cable switching to the ...

...red and blue shadows/ghosting. I checked the video settings and I can not adjust the red vertical lines or the blue. However in the advance setup I can adjust red and blue but the main vertical ...

blue and red component wires on your cable/sat box or dvd. Component video uses 3 wires for your picture (red, green, and blue).. the video runs on the green wire, but the red and blue are just chroma

...blue and red "+" are aligned to create a white image, If using component input make sure the red is to the red the blue is to the blue, try different cables for the components blue and red. Try ...

...are... 1) 3D Video 2) Warped Video 3) Convergence menu does not adjust the red or blue correctly. Go here for a solution... ...

...on the TV using the (Red/Blue/Green/Red/White) Component cable to get both audio and video from it. If you have any questions on connectivity, you may wish to reply with your query. Thanks, ...

...red/blue/green RCA inputs). For this you need a cable that has HDMI on one end and red/blue/green for video RCA's +red/white RCA's audio. This would give you 1080i resolution with stereo audio. Hope ...