Mitsubishi VS-45605 50" Rear Projection Television "tv makes pop sound" Questions

...TV is that it makes a pop sound and then the picture and sound will cut off. The TV light is still on but no picture or sound. When I unplug the TV and leave it off for about 30 min. and cut it back ...

...TV has started to settle and it makes popping sounds when either on or off. These popping sounds are not audio related, they are similar to what you would hear if you pushed or pulled on the TV from ...

...pop sound, shut off with red light unplugged tv overnight an tried plugging in the next day, tv has no power now, any help or idea, thanks DI YOU LOOK AT THE LAMP ? THAT WILL MAKE A POP SOUND WHEN ...

...makes popping or clicking noise. |Last night the tv just made a snapping noise and then quite. When you try to power it up it makes a clicking, popping noise. The only sound i can relate it to is the ...

...tv and is only about 9 mths old recently it has started occassionally making a loud popping sound the picture goes off the screen and comes back immediately when this happens i cant figure it out any ...

...tv made a loud pop as it was turning on for the first time, so I shut it off waited a few minutes turned it back on and it sounds like it is cracking and going to make a pop sound again and it has no ...

...and flickering I have a 50" rear projection TV. After about 45 min of use it makes a snapping and popping sound and the picture flickers off and on. Any ideas? ...

...makes a pop sound. can u help me? I guess loud sizzling was from High Voltage Splitter in your TV. HV seems cracked and leaking high voltage. You can observe and confirm it by removing back cover and ...

...TV worked fine. During the last few weeks, I would hear a pop and then the picutre would go black and then come back after a few seconds. Last Saturday I heard a pop and then the picture went black. ...

...tv went black. Now if you try and turn it on, it makes a grinding sound. any ideas on what happened. thank you Sounds like the lamp popped. replace the lamp first and see if that helps. The grinding ...