Mitsubishi WS-55809 55" Rear Projection Television "power supply wt 46809" Questions

WT-46809 Powers Off; Code 2-2 My Mitsu 46809 powers on, the off in abot 2 seconds. Error code is 2-2. Fuses FA904 (125V, 5A-- 24V supply?), and FA905 (125V, 5A-- neg 24V supply) are open. These are on

...power supply or set is in shutdown---has a latch circuit.I have another suggestion based on having worked on hundreds of these sets-----Look first directly under the picture tubes and above the main ...

...Power supply will most likely have to be replaced. Very common, the capacitor's inside these units due tend to get overheated and burn out. You can test power coming from the power supply with a ...

Mitsubishi WT-46809 46 in. Code is a 2-1 sorry not a 1-2. Does this help you any? x-ray protect, problem in the sweep or power supply circuit. Sorry no easy fix here.

Same guy more info...code 2 blinks pause 2 blinks this code indicates that a power supply line. is shorted. the safty cuircits have detected an overcurrent or overvoltage situation.

...power supply has died. On a machine of this age possibly due to aging capacitors and drifting value of resistors. Check the poer supply secondary for leakind capacitors and the line output stage, ...

...i believe that it is a blown fuse is this something that I could fix myself? error code 22 means short to ground. for a start check your power supply to see if anything is shorted to the

...power supply ) circuitary fails to perform its function properly and giving irregular supply to the main circuitory board of the TV because of having some failure of electronic components housed on ...

...and cost me about 400 bucks to fix it. Just wanted to add that my repairman said it was a power supply, convergence issues, and that items on the board need to be replaced. Cost me approx.

...power supply problem? I had a service man come and look at it and I feel he was taking advantage of me. I was quoted 1800.00 for the convergence ic's a new power board and 3 lenses. I did the self ...