Mitsubishi WS-65809 65" Rear Projection Television "testing pico fuses" Questions

Ad

Question about Sony Televison & Video

1 Answer

how do i know which pico fuse is bad on my circut board This can be tested with multimeter only, set multimeter on continuity and check pico fuse both pins, if meter shows zero ohms resistance that ...

Ad

Question about Sony Televison & Video

1 Answer

...pico fuses on the G boards, and tested each convergence resistor along with the pico fuses on the D board--albeit they were still soldered in place. I desoldered two pico fuses and one resistor to ...

Ad

Question about Sony Televison & Video

1 Answer

...pico fuses on the D board and also the 2 pico fuses on the g board. Usually one on each board will require replacement with the new ICs. Then just pressing the perfect focus should reset the ...

Question about Mitsubishi Televison & Video

1 Answer

both 5amp pico fuses they will appear lime green and look like resistors without color bands. They are located on the same board as the convergence Ics. Just test them for continuity with a ohms meter

Question about Sony Televison & Video

2 Answers

...pico fuses (3.5 A) and all tested fine on the continuity test. Is there something else I could check? You should check / test pico fuses marked with PS8001, PS8002, PS8003, PS8004, PS8005 and PS8006 ...

Question about Sony Televison & Video

1 Answer

...pico fuses on the g board and I didnt mess with any of the alignment on through the remote. If anyone could help me with this issue it would be much appreciated Thanks You have to remove one leg of ...

Question about Sony Televison & Video

1 Answer

...pico fuses test fine too. did you check the two pico fuses on the G board. Usually the picos next to the ICs on the D board will be good, but the ones on the G board will blow when the original ICs ...

Question about Panasonic Televison & Video

1 Answer

...pico fuse on schematic 2) testing fuse 3) creating jumper to pins Thanks for your help, Matt There is no pico fuses in that model that can be affected by the convergence circuits. You can scratch the ...

Question about Mitsubishi Televison & Video

1 Answer

...they say it must be my ic yes when either of the two Pico fuses F9A04 or F9A05 fail its caused by the convergence IC. replace the IC and both pico fuses should restore normal operation in most

Question about Sony Televison & Video

1 Answer

...pico fuses near stk. OK.. 5 amp pico on power More model:46wt510, turns on, got sound, very dark picture shuts down when trying to adjustwith front colors controls.. then front stanby lite blicks 5 ...

Not finding what you are looking for?
Mitsubishi WS-65809 65" Rear Projection Television Logo

646 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...