Green light comes on then goes right back off. I have a Mitsubishi HD 1080 Diamond rear projection that is about five years old. I held the menu and device button down to get the code. It blinked 2 ...
Question about Mitsubishi Televison & Video
...off after 2 seconds, I held i=menue and input butons simeltaniously for 5 seconds and i got the blink blink blink blink blink blink blink blink blink blink code does anybody know what the problem ...
Question about Mitsubishi Televison & Video
The Mitsubishi Diamond Series WS-65908 does not power up. The troubleshooting code is 2-4 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray protection 2 blink-then 2 ...
Our Mitsubishi projection tv went out one day. When we went to turn it back on all it does is blink the green light for a few seconds and then shuts off. What could it be? Where can we look to see ...
...board may need to be replaced as well as the lamp. The set should give an error code such as blinking lights from the front button assembly. You need to count the blinks and take note if there ...
...on front of tv for at least 5 seconds and then release both together. Watch for power light to blink in a sequence: 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray ...
Question about Mitsubishi Televison & Video
...?menu? buttons on front of tv for at least 5 seconds and then release both together. The set should blink a two digit error code, like---2 blinks, a pause and 2 blinks---it will repeat it about 5 ...
...on front of tv for at least 5 seconds and then release both together. Watch for power light to blink in a sequence: 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray ...
...13 on mitsubishi wd52628 tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then press ...
...on front of tv for at least 5 seconds and then release both together. Watch for power light to blink in a sequence: 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray ...
646 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
482 Questions
301 Questions