Mitsubishi WS-55857 55" Rear Projection Television "tv convergence red down" Questions

...TV most likely a convergence failure. ( common problem ) Here are some of the most common symptoms and example photos of a convergence problem Screen looks 3D Colors don't line up One or more colors ...

...tv the red colors are seperate from the other colors which makes the picture blurry. I tried to converge the colors, but the red x only goes left to right not up and down. this indicates to me that ...

...tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.The tv conververgence board must have these parts changes to solved the tv convergence picture problems.The ...

...Sony Convergence http://www.techlore.com/blog/entry/19694/Sony-Convergence-Repair-My-Sony-TV-has-a-distorted-picture-/

...convergence on my JVC 56, and am hoping someone will be able to help me. The red seems to be off to the laft of the screen if you are looking at the tv. When I do the manual converge the blue will ...

...convergence: Note: For best results, the Projection TV needs to be turned on for 15 minutes or longer before adjusting the picture tubes (convergence). To adjust the convergence of the picture tubes: ...

tv on 3 red blinks push off get 3 red blinks, infact get 3 red blinks nothing for 10 seconds & get 3 red blinks ongoing??? can't turn on or off 3 blinks means the convergence circuits are shutting

...CONVERGENCE OF GREEN AND RED I HAVE A VERY AWFUL PICTURE ON MY TV.....IN THE UPPER LEFT CORNER THE PICTURE IS WAVY AND I GO IN TO THE CONVERGENCE AND I CAN CONVERGE THE BLUE AND GREEN BUT I CAN NOT ...

tv convergence board require changes 2 STK convergence ICS and some or all of it resitors too.For fixing the convergence board to solved convergence picture problems.The shop,will cost u like $300-350

...tv convergence board have dead 2 STK convergence ICS and some or all it resistors are dead too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence ...