Mitsubishi VS-50605 50" Rear Projection Television "tv lines until warms" Questions

...lines come up after TV warms-up and then starts moving up and down approximately 2-3 lines on screen and continues while TV is on until turned off. check secondary power supply there is a budged ...

...TV, it warms faster and the lines disapear sooner. Thanks for your help. You will need to remove the signal board. This is the board with the RCA jacks and RF connectors. On this board there will be ...

...tv when turned on has light blue lines on the pic and now theyre light purple n become wavy until the tv warms up it looks perectly fine unless you look carefully they are still there but less ...

lines appear until TV is warmed up completely. After warm up the picture is great again. Any ideas? I've had the same problem for about the last 6 months. My workaround which was to leave the tv on 24

...tv has lines on screen until it warms up What could be causing thi. Once it warms up the picture is fine. which takes about 10 minutes I have the same issue with mine which started a couple of months ...

...lines when you turn it on until it warms up it still does it but not as bad Try resetting the TV to the factory settings. Try connecting the TV directly to a different wall outlet and check. If the ...

make a series of popping sounds with horizonal lines interferring with the picture, this will last for about 15 minutes then will clear up. do they clear up if you were to walk up to the tv and hit it

...TV lines appear. After if warms up the lines start to fade. I have had the TV for eights years. We have an HD box connected to it, but that doesn't help. Are they thin, white lines running east to ...

tv on to warm up, the lines never go away. Sometimes they fade out so you can vaguely see the picture on the screen but most of the time you can't tell anything that's being shown. Any

...until it warms up It sounds like a fault on the line output stage, but to be perfectly honest I have never seen inside a projection tv so I can only guess a faulty line output transformer or line ...