Mitsubishi WS-55819 55" Rear Projection Television "setting time shock protection" Questions

Mitsubishi WS-55819 power issue My 5 year old Mitsubishi WS-55819 projection TV has a power problem. When I press the power button it turns on for about 2 seconds and then turns itself off. The ...

...time varies. If the TV is switched off for a while then swtched back on the TV will operate OK again for several minutes before losing picture. TV has internal overheating problem Switch on and then ...

...protection mode,by the system.The problem is not in the convergence ,because you cannot see picture in convergence problem you ca see picture,but blotted colors,.. Your tv parts is ok.only the solder ...

...shock you. If one of the convergence IC?s are found to be bad, I would replace them both, if one has gone bad the other may go soon. I usually order my parts from Andrews Electronics in California, ...

No Picture, full sound, green power light is on, backlight OK Hi! I looked for this same problem on the sight, but couldn't find it (so sorry if it exists already!). My Zenith (Model E44W46LCD) rear ...

protection (OVP), unit goes to the standby mode then displays the 3 blink fault. This is also a problem in the power supply circuit, check T603 and R672. Four blinks - No vertical Deflection (V STOP),

...time it takes to turn back off. Benjamin Its actually a very basic, tiny, annoying cause. When you open the lamp door on the back of the TV, youll see a small toggle type switch that gets pushed in ...

Hitachi 61iwx10ba Will not turn on I was hoping some of the people here could help me out. I just got this Hitachi TV that appears to be 4-5 years old. If you try and turn it on, the power light will ...