Mitsubishi WS-55819 55" Rear Projection Television "f9a04 f9a05" Questions

Ad

Question about Mitsubishi Televison & Video

1 Answer

...F9A04 & F9A05 Open. If F9A04 and F9A05 are open the convergence ICs will need to be replaced as well as the two pico fuses. You will need two STK392-570 Convergence ICs and two 5 amp pico fuses. You ...

Ad

Question about Mitsubishi Televison & Video

1 Answer

...and checked the 2 pico fuses F9A04 and F9A05, the F9A04 is blown, what I should check next? can I get detailed instructions on how to fix this problem? thanks! Your STK convergence ic's need

Ad

Question about Televison & Video

1 Answer

...hdtv Problem started with convergence problem now tv wont turn on or reset the convergence ICs and the two pico fuses F9A04 and F9A05 need replacing if you have the ws or wt series rear projection ...

Question about Mitsubishi Televison & Video

1 Answer

...new 393-110 and still does not work v21 ws-65511 ,none of the convergence menu's work did you replace both of the 5 amp pico fuses F9A04 and F9A05? They will usually blow when the old IC ...

...There should be 3 fuses...the picture is attached. The two that fail most often are the F9A04 and F9A05. Depending on the problem, you may need to replace 2 Convergence IC's (STK392-570).

Question about Mitsubishi Televison & Video

1 Answer

...does not turn on any suggestions. Thats the code for short protect. Usually its the convergence which has blown F9A04 or F9A05 if either pico is blown the convergence IC and picos will need ...

Question about Mitsubishi Televison & Video

1 Answer

...F9A04/F9A05 blown. Once I replace it I'm worried that I can't find was caused them to blow. I have found some posts that say it's the convergence output board. Can you help. it is most likely in the ...

Question about Mitsubishi Televison & Video

1 Answer

...F9A04 and F9A05 fuses (Mitsubishi) I have a Mitsubishi rear projection tv. Through forums like this, I've figured out I need the F9A04 & --05 fuses. I get the 2-2 diagnostic flash and have proved it ...

Question about Mitsubishi Televison & Video

1 Answer

...on the front comes on and there are 2 ckicks in teh rear of the unit then light goes out Check F9A04 and F9A05 on the center ( Power) Board if those fuses are open the Convergence ICs have

Question about Mitsubishi Televison & Video

1 Answer

...Any guidance? Thanks Phil Check these two green pico fuses F9A04 and F9A05 to see if they have continuity, if they dont have continuity the Convergence iC and those two picos will need

Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

258 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...