Question about LG Televison & Video
...392-570 LG PROJECTION TV MODEL NO RT62NA31RP CONVERGENCE PROBLEM I HAVE REPLACED STK 392- 570 HOW TO ADJUST PLEASE HELP ME You will have to check its manual. every model has its own function. if you ...
Question about Mitsubishi Televison & Video
...392-570 CHIPS. IF WHATEVER SET YOU HAVE USES A STK-392-110 YOU CAN USE THE STK-392-150 TO REPLACE IT--it is a higher current device than the 110 chip---there are some others even stouter but some ...
...392-570. When I turn it on sound comes on, no picture then off in a few seconds and timer/stanby light flashes in sequence of four. Only problem before was convergence. Suggestions? FOUR Blinks---No ...
...glasses This is a common problem that would require 2 Convergence output IC's to fix . The part # STK392-560 replace with STK 392-570. a repair shop would charge between $200-$300 (parts cost
...output ICs to solve tv problem.This set uses two of the STK-392-570 IC chips for this (convergence problem) Local tv repairman will do this job if you have no experience of electronics stuff
392-570 for my lg another problem occurred is that I have two resistors that burns 0.8hom Please be guided towards the correct solution The low value resistors that are burnt were caused by the defect
...392-570 that last longer and don't get as hot (as recommended everywhere). The replacements are original new Sanyo parts, and I also replaced the two pico fuses PS8005 and PS8006 (5A 125V) that were ...
...392-570 convergence chips; they are located on a large metal heat sink with fins at the front of the middle board inside the set. The board has to be removed to replace them. A pair of the chips can ...
Question about LG Televison & Video
...392 570)Where would I get one and at what est costs? Is not gonna be cheap. with material and labor costs being what they are, it is today cheaper to replace the set with a new one and a warranty to ...
Question about Mitsubishi Televison & Video
...392-570 to stk 392-560 is that ok ? I would definitely stay with the original stock number. Always a good rule, unless an authorized repair is warranted. As for resistor replacement any philips, NTE ...
271 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions