Mitsubishi WS-65909 65" Rear Projection Television "tv hdmi reset" Questions

...HDMI plug on the back of the TV does seem loose. I've tried moving the connection around when I plug it in, doing power resets and still get the problem. I THINK YOU SHOULD JUST GET A NEW TV .Sorry ...

...boxes upgrading it softwares.The tv HDMI signal for the tv incomming broadcasting signal should be back,if not, tv might have a dead HDMI cable or that the HDMI 1 hub it plug in is shorted and

...HDMI inputs in your tv. Please unplug tv from wall socket for minute or so to get it reset, replug back in, turn it On and check its HDMI inputs appear or not. Also check for Reset option in Menu for ...

...HDMI cable from your Apple TV to your HDTV and try again." So it seems that there is something going on with the HDCP part of the HDMI connection that isn't working on the TV end. HDCP is causing the ...

...TV HDMI input #1. I did have the ONKYO receiver HDMI output to the TV turned on. I also have an Xbox connected by way of the Mitsubishi TV HDMI #2 input, and a Optical Digital cable connected for the ...

...HDMI. Reset your TV, try unplugging it for a while, if that doesn't help, try restoring or resetting it to defaults, there should be a function for that somewhere in the menus of the TV. that should ...

...HDMI input on the TV back the problem will disappear for a few seconds,[this again is on both HDMI 1 & HDMI 2 only to re occur again within a few seconds. Thank for your help. Ron ♫ The board ...

...TV the HDMI input gave me only a black screen then after plugging it in and out a few times gave me a green screen. I know the box and cable work since I hooked up another TV and it worked fine. I ...

TV is set to HDMI channel. Try a different HDMI port on back of TV. Reset the cable/sat box and reset the TV by powering off both and unplugging them for the wall outlet for 30 seconds. Turn cable/sat

...tv box to the hdmi imput on the tv. ( only one) I don't see a hdmi input to select on the device page. Cant get tv to work. If it is not there or grayed out you may have to try the soft reset ...