...power light comes on for a few seconds and then goes off:On front of set press and hold both the Menu and Input (device) buttons at the same time for at least five seconds and release both ...
...won39;t turn on no power what so ever when plugged in Follow the power cord (set unplugged) into the set as it goes directly to the main fuse (should be 6.3 amp) and see if it is good or
Question about Televison & Video
...played for a while but i turned it off at the surge protectoe now it won't come back on. Apex Rear Projection TV Class PU-3 checked the fuse the set has connected to where the power cord
...Power-UP: 1. Red Standby lights up (front of tv) 2. Green "On" lights "blinks/chirps" and then stops goes dark. 3. Red Stanby lights remains on. 4. Black screen. Found two blown ...
goes off then comes back. Sounds like you might have a cold solder or bad connection at the power supply. Don39;t fool with this yourself. TV39;s today are very delicate and you need to take
Question about Mitsubishi Televison & Video
...goes to gray, green then it cuts off by itself. I tried the resets but nothings changes. I also hear a hiking sound when it does this. Does anyone knows what it could be? Hi!That39;s a clear ...
Question about Mitsubishi Televison & Video
power light goes off, press both the menu and input buttons on the front of the set (not the remote) and hold both for about five seconds and release.Power light will blink a two digit error code like
...power surge fried internal fuse and possibly more. The least expensive way to get this repair is to physically take the tv to the repair shop. If they have to make house calls, the cost goes up ...
...Power and it goes through the entire cycle finally resting at all 3 lights blinking. Any help would be appreciated. Thanks in advance. Did u ever replace the Ballast board for this tv?No?,that ur tv ...
83 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions