Mitsubishi WS-55613 55" Rear Projection HDTV "hdmi port" Questions

...HDMI port on a Sony Bravia KDF-46E3000 There are two HDMI (High Definition Multimedia Interface) ports on your Television.Please refer the diagram below to know about the HDMI ports of your Sony ...

...HDMI tv port hub,the other side of HDMI cable to the HDMI DVD player port hub that it.Now u,must know with HDMI hub port u put ur signal in like 1 to 4,now go to that HDMI port hub,and will find ur ...

HDMI port on TV and HDMI to adapter to VGA port on laptop. Don't have any other electronics with HDMI ports besides laptop to try troubleshooting the TV. never plug in hdmi when comp.is on you

HDMI port. I am not sure of the type of port on the TV. Are there cables the have HDMI on one end and a configuration that will match with the Mitsubishi HDTV port? Yes, try radio shack, or home depot

...one HDMI in port. My WS 55311 HD1080 series has hd obviously but i cant fiund any hdmi ports... i think so All HD tv have four HDMI ports. OK...it only has one HDMI input!!!...hope thats all you

...HDMI port anymore I have had a PC attached to my Mitsubishi WD-73333 through a Sony receiver to the HDMI port 1 and it has been working well for years. Recently, the TV does not recognize the HDMI ...

...HDMI port has to be enabled, if it has to be enabled, do so. Now if the port is enabled either by you or as default, check to see if your other ports are working with various other inputs. Then get ...

...a vga port but my tv does not Ur Laptop have USB ports?Ur tv have HDMI ports? Use the HDMI cable plug in the USB port in the laptop side,plug the other end to the the tv HDMI port with the other

...HDMI port can be replaced, but more likely you will need to replace the entire board the HDMI resides on. Ports are typically just conductors, ie wires. It's probably not the conductors that are ...

...HDMI port on your TV. Make sure the TV HDMI port is selected using your TV remote. Turn ON the HDMI device. If the port is working, the TV and HDMI device will establish a connection and the screen ...