Mitsubishi WS-55613 55" Rear Projection HDTV "blinking" Questions

Green light comes on then goes right back off. I have a Mitsubishi HD 1080 Diamond rear projection that is about five years old. I held the menu and device button down to get the code. It blinked 2 ...

i have a mitsubishi 1080 series wt-42311 model i power it on and led light turns off after 2 seconds, I held i=menue and input butons simeltaniously for 5 seconds and i got the blink blink blink blink

The Mitsubishi Diamond Series WS-65908 does not power up. The troubleshooting code is 2-4 1 blink-then 2 blinks-------no error 2 blink-then 1 blink-------X-ray protection 2 blink-then 2 ...

Our Mitsubishi projection tv went out one day. When we went to turn it back on all it does is blink the green light for a few seconds and then shuts off. What could it be? Where can we look to see ...

...board may need to be replaced as well as the lamp. The set should give an error code such as blinking lights from the front button assembly. You need to count the blinks and take note if there ...

GET DIAGNOSTIC CODES UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ON FOR A MOMENT AND GOES OFF. PRESS AND HOLD “device”(input) and “menu” buttons on front of tv for at least 5 ...

power light comes on for about 3 seconds and turns off. no screen activity whatsoever. MOST OF THESE SETS HAVE A SELF DIAGNOSTIC: UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ON

the power on no piture turn on tv no piture If the power light comes on (green) for a few seconds and goes off: MOST OF THESE SETS HAVE A SELF DIAGNOSTIC: UNPLUG TV AND THEN PLUG BACK IN---TURN ...

error code 13 on mitsubishi wd52628 tv will not power on. no red or yellow status light. Status light green, blinks rapidly, then blinks 1 time followed by 3 blinks. wait for the light to go out then ...

was working fine now will not turn on MOST OF THESE SETS HAVE A SELF DIAGNOSTIC: UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT COMES ONFOR A MOMENT AND GOES OFF. PRESS AND HOLD "device