Mitsubishi WS-55613 55" Rear Projection HDTV "400" Questions

...must be replaced before it is know if the Electronics Package must be sent in I consider this a $400 gamble to make an $800 decision. If replacing the Capacitors takes care of it (%50 success

...the bowtie problem. I was told this was probably convergence IC's and was quoted between $250-400 to fix it. I saw a previous post about replacing them with STK-392-110's which sell for $13 a ...

The picture is red, no other colors. Is there anything I can do to fix it myself, or spend 400.00 dollars for new light which its not worth it. The safest and best thing you should do it to buy new tv

...look under power supply board around flyback. they have bad solder joints. it will then blow the 400 ma fuse. just rtesolder the flyback and replace the 400 ma fuse beside ...

...tv's to need these conversion IC's replaced for a tech to come out and do that cost about $350-$400 electech this is the conversion IC's that are doing this and it is common for all projection ...

...and that it's roughly $100. I called some TV places and they estimated the repair as about $400-500. I'm wondering if they have the diagnosis correct and if so, what the average repair would ...

...a strange pattern in the picture. he said it was called a "herringbone pattern" and would be about 400-500 to fix. any suggestions for do it myself repair? Herringbone (and other patterns) can be ...

...have the back off and a fan blowing on it and it doesn't help. Everyone says it will cost at least $400 to fix it and we should just throw it away and get a new one. Problem being I can't get a 48 in ...

...disassembling a set, soldering in 8 new caps and rebuilding the chassis. Rebuilds will run you $400-$500 in rebuild costs and an additional $200-$400 in labor, depending on the

...worked for short time, now dead We bought our 55H70 in 2001. In 2003, we had ??? replaced for $400. We turned it on this weekend and t made a popping sound, followed by a release sound, kind of ...