Mitsubishi WS-65713 65" Rear Projection HDTV "memorize channel" Questions

...memorize channels 003-125 .when programing starts it starts on channel 001 but our first channel with our cable provider begins with 003 this TV will not tune modern cable signals. You must use a ...

...chanels when connected to a cable box? If you have remote control for the channels on your set, try to push menu then choose "memorize channel" or choose "cable" then do the channel memory.

...to that channel. Then go to the "setup" screen and navigate around until you find the "channel setup" section. There you will find an option to memorize channels, including the channel you are

...your menu and look at "ant.A" if it is written"air" you`ll have to switch it to "cable" and then memorize/scan for channels. If you`d like the owners manual just click HERE Hope this help and good ...

Can't seem to add HD channels to Mitsubishi WS-65513 I followed the poor instructions on page 58 for memorizing channels on antenna B (direct cable). No new channels seem to be added that are showing ...

My WS65713 shuts off after flashing green light. I unplugged and perform system reset. Some time it works sometime not. The tv won't memorize channels

Mitsubishi WS 55411 not finding/memorizing channels I have a mitsubishi WS 55411 that is plugged into a wall outlet and it cannot find any channels or every channel is static. Is there something that ...

...the "Home Theatre, Locked to Input 1" quick fix, and I made sure that it was off. I tried to re-memorize the channels in setup, adn the only two options that I have to memorize, are Ant-B Cable ...

...a mitsubishi ws-65807. I have no sound or picture , but i do get the menu screens. also the tv will memorize the channels ..any ideas...? thanks Ken Check for coolant spill in corner of signal PC ...

...channel a connector may require an adapter depending on the type of connector. i had an old tv that required an adapter in order to plug the cable coax into it, it resembled an rca connector and is ...