Mitsubishi WS-55515 55" Rear Projection HDTV "tv input loss cable" Questions

... (For example, DVD player, cable, etc) If the problem is only from ONE input source, try replacing that cable. If it's on all input sources...might be something more internal on your TV. Good ...

...input is working when hooked to another TV. Can change the inputs and channels (atleast it sounds like it) but no visual displays show up. This solution from troylove solved my problem. troylove11 ...

input for Toshiba 27AF42 Thanks in advance Unplug the Moto box and plug back in after 1 min, as far as the codes, which remote cable/ tv? Cable remotes vary so much you will probably have to call your

tv off, then later power it on the Ant (cable) input shows static and I change modes to watch netflix on the VGA input it immediately works without delay/static. I usually do this when the static gets

...TV. It recently had a new main board put in to rectify a colour convergence problem, all went well until i turned it on and there was no volume at all. I tried different AV cables and a different ...

tv out and we lost picture and now no sound either what do I do The cable connector is no doubt causing the set to lose the signal which will cause loss of video and sound. You may be able to resolder

...TV through a 300-ohm antenna input, you are probably getting a lot of interference from the workings of the cable box. Try moving the cable box away from the TV. If the TV is connected to the cable ...

...tv If Dish is providing signal via the COMPONENT input on the set look for a loose or bad red cable--hint in this case swap red cable to green or blue and if loss of color is now different--bad cable ...

tv losses sync (?) with the signal and shows the input and display mode whenever there are fast cuts in the program, flashing lights, dark to bright scenes and so on. This does not happen in any other

...TV's dont turn on if there is no input signal. Try a DVD player and see if that works. If it does, then the issue is most likely with the cable jack on the TV, which may need to be replaced.. If you ...